Yellow-gold sparks flowed like a fountain from the tip of the Dremel tool, as small beads of metal bounced off my face. Luckily, I had an old pair of safety goggles from Lisa protecting my eyes. It was slow going, cutting the old metal, so my writer’s imagination wandered.
First I was a steel mill worker, forging raw iron. Then a commando, cutting through the barricades on the beaches of Normandy the day before the invasion. Next a safe cracker after the gold and diamonds just beyond…
“How’s it goin’?” interrupted Lisa, bringing me sharply back to reality.
I set the Dremel on the platform of the stepladder, and studied my progress. I’d managed to cut a good five inches. I had three feet to go. “This might take a while,” I told her, then fired up the Dremel again, its high-pitched soprano electric whine dropping to baritone as I touched the whirling cutting blade to the metal wall in a fresh shower of sparks. The Dremel moved right to left, awkward for a lefty, bringing back a memory from last year’s OMG Facts Calendar that some ridiculously large number of left-handed people are killed each year by right-hand optimized power tools.
Well. The job must be done: Lisa and I are on a mission of unification. Bringing together two separate peoples. Really, an act of absolute selflessness.
OK. Well. That’s a lie. We’re just making a short cut. Here’s the deal: Even though our hangars are separated only by a thin sheet of metal, we are literally distant neighbors at the Santa Rosa Route 66 Airport.
This is because of the architecture of airplane hangars.
Our airport has just one hangar building, a six-plane type (although our two planes are the only ones there) called a “T-hangar” because it’s built out of T-shaped jigsaw puzzle pieces, with three interlocking Ts to a side. The top of the T accommodates wings as wide as forty-two feet. The base of the T accommodates the far skinnier tail of an airplane.
A T-hangar is a way to efficiently pack more planes per square foot of hangar, as the Ts interlock with a bit of room left over on each end, and little space is wasted. If you just strung six airplane-sized garages together, you’d have a much larger building and a couple of planeloads of wasted space.
Now, in our case, I have the end hangar on the North and Lisa has the end hangar on the South. Even though Superman would have no problem seeing though the wall that separates us, it’s a surprisingly long hike around the end of building to get from her hangar to mine and vice versa. It shouldn’t be a big deal, but you’d be surprised when we are both at the airport how often one of us needs something that’s in the other’s hangar. Plus, when we are both in one of hangars with the other hangar open, we can’t help but worry a bit about the security of the airplane next door.
“We should just cut a damn hatchway in the wall between our hangars,” Lisa said one afternoon after coming back from the other side with the wrong screwdriver.
I started studying the wall. It was made up of door-width metal panels, connected to each other with large nuts and bolts, then connected to a heavy frame work. The walls aren’t “load bearing,” meaning that removing one would have no effect on the structure. Of course the walls are crazy high, 18 or 20 feet. But surely cutting the bottom seven feet off of one panel wouldn’t hurt anyone.
Thus began operation shortcut. We had all kinds of worries, including, what the heck kind of metal is this, can it be cut without lasers and plasma torches, and will those 40-year-old nuts ever free themselves from their sister bolts?
As it turns out, it was a one-hour job. Or would have been if I’d remembered the right accessories the first time we drove down to do it, and if I hadn’t broken one of the said accessories on the second attempt.
Still, the cutting went well, the nuts and bolts gave way quickly under the power of our socket wrenches and skinny arms, and in no time I was able to gently lower a sheet of metal slowly into my hangar to reveal:
Of course, we had the proper blessing, and our work is largely reversible by bolting the section back into place and using some duct tape to seal the thin cut should either of us ever move away. In the mean time, we were able to bolt the panel we removed to one of Lisa’s naked walls (she needs an art intervention) where it is safe, won’t get lost, and won’t fall on anyone’s head.
And I wasn’t killed by a right-handed power tool.